We are there for you: +49 800 0010311

  High Quality Tools!

  Delivery time 1-2 workdays

clamping tool

No results were found for the filter!
6830.PrintBild..jpg
AMF horizontal clamp 6830 size 0
Galvanized and passivated. Stainless steel rivets running in case hardened bushings on sizes 2 through 6. Bearings greased. Ergonomic, oil-resistant handle with large hand rest and soft components. Loss protection for the pressure screw at the end of the clamping arm. Complete with hardened, zinc-plated pressure screw
€0.00 *
AMF horizontal clamp 6832 size 0
AMF horizontal clamp 6832 size 0
Galvanized and passivated. Stainless steel rivets running in case hardened bushings on sizes 2 to 5. Bearings greased. Ergonomic, oil-resistant handle with large hand rest and soft components. Loss protection for the pressure screw at the end of the clamping arm. Complete with hardened, zinc-plated pressure screw
€0.00 *
AMF push-pull clamp 6844 size 2
AMF push-pull clamp 6844 size 2
Compression and tension clamps. Long connecting rod guide with fastening thread and nut. Galvanized and passivated. Stainless steel rivets. Fitted screws tempered. Bearings greased. Ergonomic, oil-resistant handle with large hand rest and soft components
€0.00 *
AMF nut for T-slot rhombus M16x20
AMF nut for T-slot rhombus M16x20
Application: - Additional setting up of a clamping point when the device is already clamped - Subsequent setting up of a clamping point with an already occupied machine table T-slot - Insert the nut for T-slots "rhombus" from above into the T-slot and turn until it stops in the T-slot - to be used in conjunction with DIN 6379 studs
€0.00 *

Spannwerkzeug

Viewed