Ideal for glass, ceramics, brick, stone, and other abrasive materials, the ultimate hole saw for hard-to-cut materials. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. Cutting depth 41mm (1 5/8"). Recommended Arbors Please see below links to the arbors that we would reccomend for...

New tooth material for enhanced heat and wear resistance and greater product life. Ideal for stainless and mild steel sheet and tubes with wall thickness of up to 3mm (1/8”). New 5.5 TPI / 25mm tooth form provides a smoother, faster cut in all materials. 41mm (1.5/8") hole saw depth. Recommended Arbors Cat No Fits Hole Saw Diameter mm / inch Shank Size mm / inch A1 14 - 30mm...

Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat and wear resistance and greater product life. 51mm (2”) hole saw depth – requires...

The new Starrett Carbide Tipped Deep Cut hole saw (CTD) is the perfect solution for repeated intensive drilling in mild and stainless steel, cast iron, aluminium and copper of all thicknesses up to and including 25mm (1”). Starrett CTD hole saws feature three different angles ground on to the cutting face of each tooth on the saw. This 3-Ply tooth grind delivers a fast cut,...

The Starrett A10 Quick Hitch Arbor with 6.35mm (1/4") high speed steel pilot drill and 8.75mm (11/32") hex shank, fits hole saw diameters 32 - 210mm (1.1/4" - 8.9/32"). A set screw in the body allows for easy replacement of the pilot drill. Quick Hitch arbors permit instant change of hole saws without tools or removing the arbor from the chuck.

Shank size 11mm (7/16"). Screw thread 5/8"-18. Fits hole saws from 32-210mm (1.1./4 - 8.9/32") diameter Arbor suitable for use with demanding cutting applications - e.g. Ceramic tiles Quick hitch arbor, allowing instant change of hole saw without tools and without removing the arbor from the chuck.

The Starrett A1 Arbor with 6.35mm (1/4") high speed steel pilot drill and 8.75mm (11/32") hex shank, fits hole saw diameters 14-30mm (9/16" - 1.3/16"). A set screw in the body allows for easy replacement of the pilot drill. Screw thread 1/2" - 20.

Fitted with a 6.35mm (1/4") high speed steel pilot drill. Fits Hole Saw Diameter (mm) 32mm to 210mm Fits Hole Saw Diameter (in) 1-1/4” to 8-1/4” Fits Chuck Size (mm) 13mm Fits Chuck Size (in) 1/2” Shank Size (mm) 11mm Shank Size (in) 7/16” Screw Thread 5/8-18 Drill (HSS) Yes Drill (Carbide Tipped) No Drill Length (mm) 79mm Drill Length (in)

A6-5 Kwik Change Arbor Kit with Carbide Tipped Drill contains: - A6 Kwik Change Chuck with Hex Shank - One A6-2 Arbor for 9/16" - 1-3/16" (14-30mm) dia. Hole Saws - One A6-3 Arbor for 1-1/4" - 6" (32-152mm) dia. Hole Saws - One XA015C Carbide Tipped Pilot Drill

Fits hole saws from 14-30mm (9/16-1.3/16") diameter Arbor suitable for use with MPH Hole Saws Supplied with a longer pilot drill to allow for the deeper cutting depth of the MPH hole saw. Fits Hole Saw Diameter (mm): 14mm to 30mm Fits Hole Saw Diameter (in): 9/16" to 1-3/16" Fits Chuck Size (mm): 6.5mm Fits Chuck Size (in): 1/4" Shank Size (mm): 6.5mm Shank Size (in): 1/4"...

Der Starrett A17-38 Verriegelungsdorn mit Hochgeschwindigkeitsstahl-Pilotbohrer 6,35 mm (1/4") und 8,75 mm (11/32") Sechskantschaft, geeignet für Lochsägedurchmesser 32-210 mm (1,1/4"-8,9/32"). Der Dorn rastet fest an der Säge ein, wodurch Vibrationen vermieden werden, und ist von unschätzbarem Wert bei außergewöhnlich schwierigen Arbeiten und Produktionsläufen.