The indispensable helper for the clean construction of wooden terraces. Through the pre-drilling you get identically countersunk screw connections. The depth stop is rotationally mounted and thus leaves no annoying marks on the decking boards. Simply regulate the drilling depth according to the thickness of the planks, so that the self-tapping patio screws find the perfect...

High-quality design in fully ground quality with 2 main cutting edges and 2 pre-cutters Deep-hole spiral for very good chip removal internally ground CNC-robot ground For dimensionally accurate drilling in all wood materials, especially hard ones. Also suitable for some plastics such as acrylic / Plexiglas, Corian®, GRP, HPL coating, polycarbonate, PVC and Trespa®. Premium...

Hochwertige Ausführung in vollgeschliffener Qualität mit 2 Hauptschneiden und 2 Vorschneidern Tieflochspirale für sehr guten Spanabtransport innen geschliffen CNC-Roboterschliff Für maßhaltige Bohrungen in alle insbesondere harte Holzwerkstoffe. Auch für einige Kunststoffe wie Acryl / Plexiglas, Corian®, GFK, HPL- Beschichtung, Polycarbonat, PVC und Trespa® geeignet....

High-quality design in fully ground quality with 2 main cutting edges and 2 pre-cutters Deep-hole spiral for very good chip removal internally ground CNC-robot ground For dimensionally accurate drilling in all wood materials, especially hard ones. Also suitable for some plastics such as acrylic / Plexiglas, Corian®, GRP, HPL coating, polycarbonate, PVC and Trespa®. Premium...

Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm). Alloyed tool steel. Due to precise production also suitable for exact rod dowel drilling. For hardwood we recommend the 1493 series with lower blade. 500 - 2800 min-1. e.g. Ø 12 mm 2000 min-1 in soft wood.

Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm) Alloyed tool steel. Due to precise production also suitable for exact rod dowel drilling. For hardwood we recommend the 1493 series with lower blade. 500 - 2800 min-1. e.g. Ø 12 mm 2000 min-1 in soft wood.

For drilling through the inner and outer formwork boards in one operation, as well as drilling through wooden ceilings and floors for installations in the renovation of old buildings. Execution according to DIN 7490 and the applicable safety regulations. 800 - 2500 rpm. e.g. Ø 10 mm 2500 rpm in formwork panel.

For deep hole drilling in softwood and to a limited extent also in European hardwood Material: Alloy tool steel.

For drilling through the inner and outer formwork boards in one operation, as well as drilling through wooden ceilings and floors for installations in the renovation of old buildings. 1200 - 2500 rpm. e.g. Ø 22 mm 1200 rpm in formwork panel. Execution according to DIN 7490 and the applicable safety regulations

WS Bormax® 2.0! Center point with cutting geometry. Two offset grooved main cutting edges (from Ø 11 mm) and the toothed circumferential cutting edge with longitudinal grooves mean that significantly less feed force is required and minimize friction and the heat generated as a result. Hexagonal shank for better power transmission Alloy tool steel 900 - 3200 rpm. e.g. Ø 35 mm...

For lightning-fast change in bit holders. Drilling and countersinking in a single operation in soft wood and to a certain extent in European hard wood. Drill HSS, countersink WS.