ROCOL Schmierstoffe – Hochwertige Industrieschmierstoffe seit 1878

Products of Rocol

ROCOL: high-performance industrial lubricants and line marking systems since 1878

Since 1878, ROCOL has been producing high-performance industrial lubricants and line marking systems for professional use. Based in the UK, the brand is known for technically advanced products designed for reliability, protection, and long service life in demanding environments.

As part of the ITW group, ROCOL combines global engineering expertise with practical product innovation. Its solutions are recognised for low-corrosion formulations, strong performance, and dependable results. Industries worldwide trust ROCOL when consistent operation and technical reliability matter most.

ROCOL "Quick & Clean" Towels Bucket with 150 pc

QUICK & CLEAN is effective against: Oil Greases Paint Silicones Adhesives Sealants Bitumen Ink And many more! QUICK & CLEAN’s alcohol-based formula is gentle enough to be used on hands, but tough enough for non-porous surfaces such as: Plastic Metal Vinyl Tools Keyboards Handles Workbenches

€26.47*

Rocol Chain & Drive Spray 300ml

Displaces water, penetrates, lubricates and protects against corrosion effectively, especially in wet and aggressive conditions. Temperature range -30°C to 150°C Excellent EP performance (200 kg weld load) Excellent penetration Tough water repellent film Excellent corrosion protection Applied film has good adhesion, reducing dripping/spinning. Spinning off is reduced Directions for use: Shake well Hold can upright and spray from a distance of approx. 25 cm, thoroughly covering the chain Technical data: Appearance: Light brown liquid Base type: Mineral oil Solvent: Non-chlorinated hydrocarbon Propellant gas: CO2 (carbon dioxide) Temperature range: -30°C to 150°C Viscosity of base fluid at 40°C: 18 cSt Base fluid viscosity at 100°C: 5 cSt Shell 4-ball (IP 239)(ASTM D2596) Welding load: 200 kg Corrosion test (ASTM B 368) 5% salt spray, 2000 hrs at 35°C: 0% (no corrosion) Storage: The storage area should not be exposed to direct sunlight. The storage temperature should be kept below 50°C. Safety precautions: Classification of the substance or mixture Classification (CLP): STOT SE 3: H336; Aquatic Chronic 3: H412; Flam. Aerosol 2: H223; -: H229 Most important adverse effects: Flammable aerosol. Pressurised container: May burst if heated. May cause drowsiness and dizziness. Harmful to aquatic organisms, with long lasting effects.

€20.64*

Rocol Cold Galvanising Spray 400ml

For use where more costly plating and coating processes are not justified for cost reasons, or for those large components that cannot be protected against corrosion using a heat treatment process. The product can also be used to repair the surface of galvanized components that have been damaged or scratched. Features: Temperature range 1800C to 3000C Designed for high temperature applications only below 300 rpm No significant deposit formation - extends part life Evaporates slowly at high temperatures leaving a Molybdenum disulfide film left behind Directions for use: HT 70 can be used in normally grease lubricated bearings and applied by high pressure hand grease gun or by spatula. Just enough product is applied to thoroughly wet all running surfaces. Over-application will result in leakage from the bearing. It is recommended that bearings are cleaned prior to initial application of ROCOL HT 70 to ensure minimal deposit formation. HT 70 is not suitable for application by automatic lubrication systems. Store in a warm place to facilitate hand pumping. Do not use in closed systems that may inhibit the evaporation process Technical data: Appearance Dark gray viscous liquid Base type Hydrocarbon polymer Solids Molybdenum disulfide Temperature range 1800C to 3000C Viscosity of base fluid at 40°C 13 000 cSt Viscosity of base fluid at 100°C 315 cSt Storage Storage temperature should be controlled from 1 to 40°C. Shell 4-ball (IP 239)(ASTM D2596) Welding load 180 kg Average Hertz load 38 kg

€22.14*

Rocol Cutting Fluid RTD Liquid 5L

ROCOL® Liquid is a viscous cutting fluid / coolant containing extreme pressure additives ideal for various metal cutting operations such as broaching, tapping, drilling and more. This advanced product, called ROCOL RTD, demonstrates its effectiveness in machining a wide range of metals including hardened steels, Nimonic grades and titanium alloys. The outstanding feature of ROCOL RTD lies in its ability to drastically reduce friction, ensuring excellent cutting performance. The use of this coolant not only extends tool life but also improves the quality of the machined surfaces. Interestingly, ROCOL® Liquid can also be added to conventional mineral cutting oils. This opens up the possibility of achieving optimum results in even the most demanding cutting operations, such as broaching and gear cutting on the most resistant metals. The adaptability of this cutting oil makes it an indispensable companion in workshops and production facilities where precision and performance are top priorities.

€277.07*

Rocol DRY MOLY Spray

Product information High purity, extreme load dry film molybdenum disulphide spray designed for use where a wet lubricant cannot be tolerated. DRY MOLY Spray is applied wet for great penetration, becoming touch dry within 2 – 3 minutes, leaving a dry protective film containing more than 70% molybdenum disulphide. DRY MOLY Spray is an assembly lubricant for sliding surfaces such as plain bearings, pins, cams and slides intended to reduce friction and therefore increase life of moving parts. DRY MOLY spray can also be used in conjunction with a wet film lubricant enhancing performance and extending life of components and assemblies. Also available as a paste and as a fluid.

€24.37*

RS34131 Industrial Cleaner Rapid Dry Spray hi.jpg

Rocol Industrial Cleaner Rapid Dry Spray 300ml

ROCOL® Industrial Cleaner Rapid Dry Spray is a fast drying cleaner which leaves no residue. A specially formulated blend of degreasing solvents for removing grease, oil and general workshop grime from a wide variety of surfaces. Ideal for use where a fast drying non-chlorinated solvent cleaner is required, especially where a clean residue free surface is essential.

€18.50*

Rocol MOISTURE GUARD Green Rust Protection Spray 400ml

ROCOL® MOISTURE GUARD Green Spray ist ein grünes Rostschutzspray, welches einen dünnen, nahezu trockenen Korrosionsschutzfilm hinterlässt, der für den vorübergehenden Indoor-Schutz von Komponenten wie z. B. Lagern, Zahnrädern, Pressteilen und jeglichen bearbeiteten, vor Korrosionsangriff zu schützenden Metallerzeugnissen optimal geeignet ist - ob bei Lagerung, Transport oder zwischen Bearbeitungsgängen. Farbe grün Treibgas Kohlenwasserstoffgemisch Lösemittel nicht chlorierter Kohlenwasserstoff Filmtyp Fast trockener, weicher flexibler Film Filmdicke (typisch) Ungefähr 3 bis 5 Mikron Aushärtezeit Berührungstrocken innerhalb von 15 bis 30 Min. Schutzzeitraum Bis zu 5 Jahre drinnen, kurzzeitig draußen. Gebindegröße 400 ml

€24.65*

Rocol RT15 GREASE 400gr

Aufgrund seiner Alterungsbeständigkeit bei widrigen Bedingungen kann Fomblin RT 15 Nachschmierzeiträume drastisch verlängern. ROCOL® FOMBLIN RT15 Grease Eignet sich für die Anwendung an Getrieben, Antifriktions- und Gleitlagern bzw. auf beliebigen Gleitflächen wie z. B. Stiften, Ventilen, Kolben, Schnecken usw. Außerdem ist ROCOL® FOMBLIN RT15 Grease dank seiner Beständigkeit gegen aggressive Chemikalien und Oxidationsmittel die natürliche Wahl zur Verwendung in der chemischen Industrie, Chemischreinigung, Lebensmittelindustrie und verwandten Branchen. Merkmale: Temperaturbereich –20°C bis 200°C Hervorragende EP-Leistung (620 kg Schweißlast) Ausgezeichnete chemische Beständigkeit Sehr lange Schmierintervalle in aggressiven Umgebungen Geeignet für Sauerstoffanwendungen Ausgezeichnete Niedertemperaturbeständigkeit Gebrauchsanweisung: Manuell oder durch geeigneten Applikator, der NLGI Nr. 2-Fette handhaben kann, auftragenVerträglich mit den meisten Perfluorpolyether-Fetten. Es wird jedoch empfohlen, Lager - vor der Anwendung - von vorherigen Schmierstoffen zu befreienFalls der vorherige Schmierstoff nicht auf Perfluorpolyether basierte, ist es wichtig sicherzustellen, dass die Lager vollständig mit einem geeigneten Lösungsmittel gereinigt werden, zum Beispiel ROCOL Industrial Cleaner Rapid Drying Spray, bevor Fomblin OT15 eingefüllt wird Technische Daten: Aussehen: Weiches weißes Fett NLGI Nr. (IP 50)(ASTM D217): NLGI Nr. 2 Basistyp Perfluorpolyether Viskosität der Basisflüssigkeit bei 200°C: 1000-2000 cSt Verdicker: PTFE Temperaturbereich: -8°C bis 200°C Ölseparation (30 Std. bei 66ºC): 8% Spezifisches Gewicht: 1,91 Sauerstoff Druck-Temperatur-Rating (BAM Berlin): 345 bar bei 90C° Fomblin RT 15 ist löslich in: Fluorierten Lösungsmitteln Rüstungsspezifikationen: DTD 900/6081 (AFS 1736A) Shell 4-Kugel (IP 239)(ASTM D2596) Schweißlast: 620 kg Mittlere Hertz-Last: 85 kg Lösungsmittel-/Chemikalienbeständigkeit Alle organischen Lösungsmittel Alle organischen Säuren Salzsäure Tributylamin Flusssäure Quinolin Schwefelsäure Kalium- und Natriumhydroxid Orthophosphorsäure Natriumkarbonat Eisenchlorid / Zinkchlorid Kaliumchlorid Bortrifluorid Lagerung: Die Lagertemperatur sollte auf 1 bis 40°C geregelt sein.

€0.00*

Rocol RTD CHLORINE FREE Spray 400ml

ROCOL® RTD Chlorine Free Spray applies an economical film of metal cutting fluid directly to the cutting engagement area, particularly in areas where access proves difficult. - Chlorine Free - Features: Excellent cutting performance. Suitable for all ferrous metals Ideal for broaching, threading, drilling and general shop work Fast and practical to use Directions for use: Shake well before use and spray directly onto the workpiece or tool from a distance of 15-30 cm. Check for compatibility with painted or coated surfaces, plastics and rubber before application. Ensure sufficient ventilation Technical Data: Appearance: Red Propellant gas: Hydrocarbon mixture Solvent: Solvent-free Silicones: Not applicable Storage: The storage temperature should be kept below 50°C. Storage area should not be exposed to direct sunlight. Shell 4-ball welding load: 800 kg

€28.18*

Rocol RTD Compound Cutting Paste 500g

RTD Compound is a soft paste for use in threading and drilling and other metal cutting operations. It is ideal as a cutting fluid and coolant. ROCOL® RTD Compound is suitable for all metals including hardened steels, Nimonic grades and titanium alloys. ROCOL® RTD Compound contains extreme pressure additives, significantly reduces friction and gives excellent cutting performance. Features: Extends tool life Improves surface finish Allows increased metal removal rates Reduces production costs Directions for use: Apply directly by brush to the tool or workpiece or by dipping the tool into the agent. Technical Data: Appearance: Brown paste Odor: Mild pine Shell 4-ball Welding load (undiluted): > 800 kg Welding load (5% in oil): 315 kg Tapping torque (316 stainless steel): 11.2 nM

€20.45*

Rocol RTD Compound Tube 50g

Hand Applied Metal Cutting Lubricant Compound • ROCOL cutting compound extends tool life.• The paste-like formula improves surface finish.• It increases removal rates.• The best-selling ROCOL product reduces production costs.

€7.41*

Rocol RTD FOAMCUT Spray 300ml

ROCOL® Foamcut is suitable for all metal cutting operations on a wide range of non-ferrous and ferrous metals including copper, brass and aluminium. The foaming action ensures that the lubricant quickly penetrates to the cutting edges without running off the tool or workpiece, and allows economical application even in deep holes. This extends tool life and improves surface finish. Features: - Extends tool life - Improves surface finish - Increases metal removal rates - Reduces production costs Directions for use: ROCOL RTD Foamcut should be shaken well before use and is then sprayed directly onto the tool or workpiece from a distance of 15-30 cm. Directional control allows more accessible problematic operations and enables application exactly where required. Ensure adequate ventilation. Technical data: - Appearance: creamy white foam - Odor: Mild - Solvents: not applicable - Nitrites: not applicable - Silicones: not applicable

€34.93*

Rocol RTD Liquid

ROCOL RTD is suitable for all metals including hardened steels, Nimonic grades and titanium alloys. This product significantly reduces friction and provides excellent cutting performance. ROCOL® Liquid can also be added to standard mineral cutting oil ... For the most difficult cutting operations such as broaching and gear cutting on the toughest metals. Features: Extends tool life Improves surface finish Increases metal removal rates Reduces production costs Directions for use: ROCOL RTD Foamcut should be shaken well before use and is then sprayed directly onto the tool or workpiece from a distance of 15-30 cm. Directional control allows more accessible problematic operations and enables application exactly where required. Ensure adequate ventilation Technical data: Appearance:brown liquid Odor: mild pine Solvent: not applicable Shell 4-ball Welding load (undiluted): >800 kg Welding load (5% in oil) 315 kg

€29.45*

Rocol RTD Spray

RTD Spray 400ml is an aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives - suitable as a cutting fluid and coolant. ROCOL® RTD Spray applies an economical film of metal cutting fluid directly to the cutting engagement area, particularly in areas where access proves difficult Features: Excellent cutting performance Suitable for all ferrous metals Ideal for broaching, thread cutting, drilling and general workshop work Fast and practical to use Directions for use: Shake well before use and spray directly onto the workpiece or tool from a distance of 15-30 cm. Check for compatibility with painted or coated surfaces, plastics and rubber before application. Ensure sufficient ventilation. Technical data: Appearance: Brown liquid Solvent: Pentane Propellant gas: Propane/Butane Silicones: Not applicable Storage: The storage temperature should be kept below 50°C. Storage area should not be exposed to direct sunlight. Shell 4-ball Welding Load: 800 kg Load-Wear Index: 179 kg Tapping torque (316 stainless steel): 11.2 Nm

€30.34*

Rocol SAPPHIRE Aqua-Sil 500g

A high temperature, translucent silicone grease approved for use with potable water. Designed for the lubrication of slow speed bearings, slides and similar applications.

From €0.00*

Variants

Rocol SAPPHIRE® ADVANCE 2

The ultimate multi-purpose grease offering outstanding performance when compared to other conventional greases. Excels in high speed applications such as electric motors and fan bearings.

€16.18*

Manufacturer Navigation

Manufacturer A-Z

ROCOL: high-performance industrial lubricants and line marking systems since 1878

More Information