Contact About Us Newsletter
Go to homepage
New Top Seller Sale
€0.00*
Show all categories Lubricant Back

Rocol Chain & Drive Spray 300ml

RS22001 CHAIN and DRIVE Spray hi.png
RS22001 CHAIN and DRIVE Spray hi.png
RS22001 CHAIN and DRIVE Spray hi.png
RS22001 CHAIN and DRIVE Spray hi.png

€20.64*

Prices excl. VAT plus shipping costs

Available in 12 days, delivery time 1-3 days

Product number: RS22001

Product information "Rocol Chain & Drive Spray 300ml"

Displaces water, penetrates, lubricates and protects against corrosion effectively, especially in wet and aggressive conditions.

  • Temperature range -30°C to 150°C
  • Excellent EP performance (200 kg weld load)
  • Excellent penetration
  • Tough water repellent film
  • Excellent corrosion protection
  • Applied film has good adhesion, reducing dripping/spinning.
  • Spinning off is reduced

Directions for use:

  • Shake well
  • Hold can upright and spray from a distance of approx. 25 cm, thoroughly covering the chain

Technical data:

  • Appearance: Light brown liquid
  • Base type: Mineral oil
  • Solvent: Non-chlorinated hydrocarbon
  • Propellant gas: CO2 (carbon dioxide)
  • Temperature range: -30°C to 150°C
  • Viscosity of base fluid at 40°C: 18 cSt
  • Base fluid viscosity at 100°C: 5 cSt
  • Shell 4-ball (IP 239)(ASTM D2596)
  • Welding load: 200 kg
  • Corrosion test (ASTM B 368)

 

5% salt spray, 2000 hrs at 35°C: 0% (no corrosion)

Storage: The storage area should not be exposed to direct sunlight. The storage temperature should be kept below 50°C.

Safety precautions:

  • Classification of the substance or mixture
  • Classification (CLP): STOT SE 3: H336; Aquatic Chronic 3: H412; Flam. Aerosol 2: H223; -: H229

Most important adverse effects: Flammable aerosol. Pressurised container: May burst if heated. May cause drowsiness and dizziness. Harmful to aquatic organisms, with long lasting effects.

Person responsible for the EU:
ITW LLC & Co. KG | Am Eichenbach 14, 73054, Eislingen / Fils, Germany

Manufacturer information:
http://www.itwcp.de

Manufacturer "Rocol"

ROCOL: high-performance industrial lubricants and line marking systems since 1878

Since 1878, ROCOL has been producing high-performance industrial lubricants and line marking systems for professional use. Based in the UK, the brand is known for technically advanced products designed for reliability, protection, and long service life in demanding environments.

As part of the ITW group, ROCOL combines global engineering expertise with practical product innovation. Its solutions are recognised for low-corrosion formulations, strong performance, and dependable results. Industries worldwide trust ROCOL when consistent operation and technical reliability matter most.

More products from Rocol

Similar Items

RS69515 COLD GALVANISING Spray hi.gif
Rocol Cold Galvanising Spray 400ml
For use where more costly plating and coating processes are not justified for cost reasons, or for those large components that cannot be protected against corrosion using a heat treatment process. The product can also be used to repair the surface of galvanized components that have been damaged or scratched. Features: Temperature range 1800C to 3000C Designed for high temperature applications only below 300 rpm No significant deposit formation - extends part life Evaporates slowly at high temperatures leaving a Molybdenum disulfide film left behind Directions for use: HT 70 can be used in normally grease lubricated bearings and applied by high pressure hand grease gun or by spatula. Just enough product is applied to thoroughly wet all running surfaces. Over-application will result in leakage from the bearing. It is recommended that bearings are cleaned prior to initial application of ROCOL HT 70 to ensure minimal deposit formation. HT 70 is not suitable for application by automatic lubrication systems. Store in a warm place to facilitate hand pumping. Do not use in closed systems that may inhibit the evaporation process Technical data: Appearance Dark gray viscous liquid Base type Hydrocarbon polymer Solids Molybdenum disulfide Temperature range 1800C to 3000C Viscosity of base fluid at 40°C 13 000 cSt Viscosity of base fluid at 100°C 315 cSt Storage Storage temperature should be controlled from 1 to 40°C. Shell 4-ball (IP 239)(ASTM D2596) Welding load 180 kg Average Hertz load 38 kg

€22.14*
RS10025 DRY MOLY Spray hi.gif
Rocol DRY MOLY Spray
Product information High purity, extreme load dry film molybdenum disulphide spray designed for use where a wet lubricant cannot be tolerated. DRY MOLY Spray is applied wet for great penetration, becoming touch dry within 2 – 3 minutes, leaving a dry protective film containing more than 70% molybdenum disulphide. DRY MOLY Spray is an assembly lubricant for sliding surfaces such as plain bearings, pins, cams and slides intended to reduce friction and therefore increase life of moving parts. DRY MOLY spray can also be used in conjunction with a wet film lubricant enhancing performance and extending life of components and assemblies. Also available as a paste and as a fluid.

€24.37*
RS53081 RTD Chlorine Free Spray hi.png
Rocol RTD CHLORINE FREE Spray 400ml
ROCOL® RTD Chlorine Free Spray applies an economical film of metal cutting fluid directly to the cutting engagement area, particularly in areas where access proves difficult. - Chlorine Free - Features: Excellent cutting performance. Suitable for all ferrous metals Ideal for broaching, threading, drilling and general shop work Fast and practical to use Directions for use: Shake well before use and spray directly onto the workpiece or tool from a distance of 15-30 cm. Check for compatibility with painted or coated surfaces, plastics and rubber before application. Ensure sufficient ventilation Technical Data: Appearance: Red Propellant gas: Hydrocarbon mixture Solvent: Solvent-free Silicones: Not applicable Storage: The storage temperature should be kept below 50°C. Storage area should not be exposed to direct sunlight. Shell 4-ball welding load: 800 kg

€28.18*
Rocol-Moisture-Guard-Rostschutz.jpg
Rocol MOISTURE GUARD Green Rust Protection Spray 400ml
ROCOL® MOISTURE GUARD Green Spray ist ein grünes Rostschutzspray, welches einen dünnen, nahezu trockenen Korrosionsschutzfilm hinterlässt, der für den vorübergehenden Indoor-Schutz von Komponenten wie z. B. Lagern, Zahnrädern, Pressteilen und jeglichen bearbeiteten, vor Korrosionsangriff zu schützenden Metallerzeugnissen optimal geeignet ist - ob bei Lagerung, Transport oder zwischen Bearbeitungsgängen. Farbe grün Treibgas Kohlenwasserstoffgemisch Lösemittel nicht chlorierter Kohlenwasserstoff Filmtyp Fast trockener, weicher flexibler Film Filmdicke (typisch) Ungefähr 3 bis 5 Mikron Aushärtezeit Berührungstrocken innerhalb von 15 bis 30 Min. Schutzzeitraum Bis zu 5 Jahre drinnen, kurzzeitig draußen. Gebindegröße 400 ml

€24.65*
RS12441 SAPPHIRE Advance 2 380g hi.png
Rocol SAPPHIRE® ADVANCE 2
The ultimate multi-purpose grease offering outstanding performance when compared to other conventional greases. Excels in high speed applications such as electric motors and fan bearings.

€16.18*
RS53072 RTD Liquid 400ml hi.gif
Rocol RTD Liquid
 ROCOL RTD is suitable for all metals including hardened steels, Nimonic grades and titanium alloys. This product significantly reduces friction and provides excellent cutting performance. ROCOL® Liquid can also be added to standard mineral cutting oil ... For the most difficult cutting operations such as broaching and gear cutting on the toughest metals. Features: Extends tool life Improves surface finish Increases metal removal rates Reduces production costs Directions for use: ROCOL RTD Foamcut should be shaken well before use and is then sprayed directly onto the tool or workpiece from a distance of 15-30 cm. Directional control allows more accessible problematic operations and enables application exactly where required. Ensure adequate ventilation Technical data: Appearance:brown liquid Odor: mild pine Solvent: not applicable Shell 4-ball Welding load (undiluted): >800 kg Welding load (5% in oil) 315 kg

€29.45*