Hultafors delivers durable, ergonomic tools designed for professional use. With exceptional precision and rugged quality, the brand offers reliable solutions for every trade challenge.
Products of Hultafors
Hultafors chisel HDC 6
From
€25.39*
The Hultafors chisel is forged from one piece. The entire blade, including the Santoprene handle, can be laid flat against the surface, allowing cutting parallel to a flat surface. The 25 degree cutting angle provides the best balance of sharpness and durability, and the high-impact nylon firing pin can be replaced when worn. There is also a practical holster that fits both in a belt and on a button.
Hultafors Adjustable Nailer 209 SB
€100.82*
High-quality steel nail puller with an ergonomic, rubber-coated handle.
Wide contact area and thin ends allow access to small niches and minimize the risk of damaging the workpiece.
The curved part of the chisel provides ample hand space and minimizes the risk of injury
Hultafors Agelsjön 0,5 | Premium Mini Hatchet
€82.01*
Easy to use and easy to carry. The hatchet is hand-forged and made of Swedish quality steel. The axe is named after the nearby lake Ågelsjön, where water power drives the wheel of the forge.
Wooden handle made of American hickory, treated with linseed oil
Convex grinding edge
Cutting edge is ground, polished and ready for use
Leather cutting guard included
HEAD WEIGHT 500 g
HANDLE TYPE Curved
WEIGHT WITH HANDLE 775 g
HANDLE Hickory
HANDLE LENGTH 235 mm/9"
Hultafors angle PS 90
From
€48.61*
The shanks and blade fold for easy portability. The angle is suitable for working in the left or right position. Four points for snapping (22.5°, 45°, 67.5°, 90°). In addition, 21 other angles are drawn. The shanks and blade are made of anodized aluminum.
Hultafors carpenter's hammer TC 16 L
From
€48.43*
Face with optimal angle and shape
Steel handle with I-profile for increased resistanceFlat, strong claw for good accessibility without leaving marks. In addition, the edges are rounded to prevent snagging on clothing.The opening and angle of the claw are designed for optimal grasping of the nail
Hultafors Carpenter's Hammer TR 16 XL
From
€54.73*
Ergonomically shaped hammer, forged from one piece for increased resistance, with vibration-damping urethane insert. The flat, strong claw allows good accessibility without leaving marks. The opening and angle of the claw are designed for optimal gripping of the nail. The ergonomically shaped handle with clear end stop for a secure grip is available in two sizes, Large and X-Large.
Vibration-damping urethane insert.
Straight claw for better accessibility and longer handle for higher impact power in demanding work.
Steel handle with I-profile for increased resistance.
Ergonomically shaped handle with clear end stop in two sizes, Large and X-Large.
Striking surface with optimal angle and shape.
Hultafors chalk line chalk NEONORANGE 200
From
€3.37*
Experience a new level of precision with Hultafors chalk line powder. This high-quality chalk, specially developed for craftsmen like you, offers unmatched accuracy and visible markings that elevate your work to the next level.
Hultafors chalk line powder is not just a tool, but a promise of quality. Its special formula ensures clear, highly visible lines that help you make precise measurements and cuts. No more smudging or fading, just precise lines you can rely on.
Never worry about inaccurate markings again. With this chalk line powder from Hultafors, known for their reliable hand tools, every marking becomes a breeze. Trust in Hultafors and see how a simple chalk can revolutionize your way of working.
Hultafors chisel knife STK
€7.92*
Powerful knife with chisel function in V-grind. The unique way of attaching it to workwear buttons means it cannot get lost, but at the same time it is easy to remove. Blade made of 3 mm thick Japanese knife steel, a carbon steel hardened to 58-60 HRC.
Features
Cutting edge ground with double cutting angle and finally honed to leather.
Shaft and scabbard made of particularly impact-resistant PP plastic.
Sheath can be attached either to the belt or to buttons. For a thick belt, simply remove the small pin on the fastener.
The chisel knife STK-PH is supplied with a cardboard sheath instead of a scabbard. STK fits in the same quiver as the coarse knife.
Hultafors chisel set HDC S4, 6-25
From
€93.99*
Forged in one piece through the entire handle.
The completely flat underside enables parallel cuts.
The non-slip Santoprene handle feels good in the hand.
Convenient holster design for easy attachment to a belt or button.
Replaceable percussion cap
25 degree cutting angle
Hultafors craft knife HVK BIO
€6.18*
Blade is made of 2.5mm carbon steel, hardened to 58-60 HRC
The blade is ground in several steps and then honed on leather
Material saving in the handle to reduce the environmental impact
Hole in handle for tool security
Hultafors deep hole marker & marker pencil with integrated sharpener
€9.07*
High-contrast markings on all types of surfaces.
The Hultafors dry marker was developed together with craftsmen. It is easy to take out of the holster and has a handy and ergonomic design.
Grip-friendly pen in holster with integrated sharpener for clear markings. The Hultafors dry marker is easy to remove from the holster without having to let go of the workpiece.
The shape of the holster ensures that the pencil remains in position even when moving. The pencil sharpener is also located in the holster and is therefore easy to reach at all times.
Dirt and moisture are channelled away from the pencil via a hole in the underside of the holster for longer durability. The pen can be easily replaced.
Grip-friendly and ergonomic design
Roll stop on pen and holster
Sharp and accessible sharpener in the holster
Optimised pencil for durability and resistance to moisture
Hultafors double holster STK & HVK
€21.92*
Chisel knife = sturdy knife with a V-shaped grinding chisel function
Craftsman's knife = developed for a wide variety of craftsman's needs
Double holster allows quick access to both knives
Double holster is made of impact-resistant PP plastic, connected with rivets and an elastic loop
Hultafors Electrician Hammer TR
€77.42*
Forged in one piece - for maximum stability and durability. The U-shaped striking surface allows you to work close to ceilings and corners without leaving marks on the surrounding surfaces. This makes the hammer the ideal tool for electricians, for attaching profiles and baseboards or for fine carpentry work. The straight claw also makes it easier to work in the tightest of spaces. This is because the hammer can be held at a smaller angle, making it easier to apply straight to the nail from above. The ergonomically designed handle with a clear end stop offers a secure grip and a hole for attaching a strap. The 200 and 250mm markings on the handle aid in evenly spaced cable clamps.
Hultafors Fäustel MER 1200
€46.09*
The forged head is sandblasted and clear lacquered, with hardened and surface-ground striking faces on both sides, making it ideal for a variety of jobs. The mallet is available in two versions: with a wooden hickory handle for a classic grip or as a MER 1200 model with a steel handle and rubber grip for non-slip handling.
Hultafors fiberglass folding rule G59 -mm- 1m
From
€5.42*
Numbering in wear-resistant foil embossing.
Two-sided millimeter divisions in black with red decimeter numbers.
Conforms to EU class III.
All joints lock in 90 degree increments.
EU Class 3 certified
Hultafors fiberglass folding rule G59 -mm- 2m
From
€5.10*
Numbering in wear-resistant foil embossing.
Two-sided millimeter divisions in black with red decimeter numbers.
Conforms to EU class III.
All joints lock in 90 degree increments.
EU Class 3 certified
Hultafors folding ruler A 59 made of anodised aluminum millimeter units. 1m
From
€18.70*
Two-sided millimeter scale in black.
High resistance to moisture, heat and wear
Conforms to EU class III
Hultafors gouge IGC
€18.21*
A curved chisel sharpened on the inside for a perfect 11mm radius with a single stroke. It is sharp, reliable, and always ready for use when fitting lock cases and hinges in wooden doors. The high-quality Japanese steel blade is protected against rust with Electrophoretic deposition (EPD). The heavy-duty handle is designed to endure repeated hammering.
Total length: 232 mm
Blade width: 20 mm
Radius: 11 mm
%
Hultafors gouge OGC
€18.21*
€22.52*
(19.14% saved)
A curved chisel, sharpened on the outside for a perfect 8mm radius in one stroke. It's sharp, dependable, and always within reach, perfect for cutting cable ditches. The gouge boasts a high-quality Japanese steel blade and a heavy-duty handle to endure repeated hammering. Comes with a smart holster for convenient access.
Total length: 232 mm
Radius: 8 mm
Hultafors hand saw HBX-22-7
From
€31.45*
Einzigartiges 3-Phasen Sägezahn Design kombiniert Effektivität und eine lange Lebensdauer
Umweltfreundliche Pulverbeschichtung auf Wachsbasis bietet Rostschutz, weniger Reibung und kraftaufwendige Seitenvibrationen
Verlässliches, einfaches und sicheres System, um Sägeblätter zu wechseln.
Ergonomischer und haltbarer ABS Griff
Ein einzigartiger und haltbarer Blattschutz mit schnelllöse Funktion.
Klingenstärke 1 mm
Hultafors Hultan 0,5 | Premium Trekking Axe
€88.08*
Because of its versatility and lightness, the Hultån hatchet has every chance of becoming a bestseller. It is named after the river Hultån, which once powered our blacksmiths. Today, Hultån flows through a tunnel under Hults Bruk. Like all our axes, Hultån is hand-forged and made from quality Swedish steel.
Wooden handle made of American hickory, treated with linseed oil
Convex grinding edge
Cutting edge is ground, polished and ready for use
Leather cutting guard included
HEAD WEIGHT 500 g
HANDLE TYPE Curved
WEIGHT WITH HANDLE 805 g
HANDLE Hickory
HANDLE LENGTH 375 mm/15"
Hultafors masonry hammer MR 500
€32.14*
The hammer has a steel handle with an ergonomically shaped and ribbed handle that fits perfectly in the hand. The striking surface is hardened and the chisel is ground.
Hultafors masonry hammer TB 600
€51.84*
Forged from one piece for increased durability.
Sealed square face
rubber grip
Perfect angle and shape of the claw makes splitting rocks safer.
Steel handle with I-profile for increased resistance.
Handle with a handy end stopper for a secure grip.
Holes for attaching a strap.
Hultafors mini try square
From
€15.37*
All-aluminum tool with CNC-machined edges for increased precision and durability.
Laser etched graduations with excellent readability and wear resistance.
Anti-glare anodized protective layer.
On the back of the small and large version, there is a white area for notes
Ruler with metric graduations.
It is used for precise 45° and 90° markings. It can also be used as a protractor to easily determine and mark other angles.