No results were found for the filter!
STARRETT Automatic Center Punch 18 A 5" Case diameter: 14 mm Marking drill hole centers or screw positions has never been so easy. No need for a hammer, just place the drill at the desired position and press the centre punch. The built-in mechanism triggers an impact, the force of which can be adjusted by turning the cap. This ensures that each marking is evenly deep. For iron, plastic or wood. Housing with...
€29.50 *
Clawhammer curved Leather Grip 560g (20 oz) Curved claw and smooth face Very robust, forged under highest quality standards from one piece of tool steel head weight 560g, diameter 27mm, length 345mm, total weight 805g The best hammer in America - Estwing made in USA
€65.00 *
Halder Insert for SUPERCRAFT soft-face mallet, Ø 20, Nylon They consist of extruded, extremely homogeneous material. Compared to injection-moulded plastic inserts, they are therefore significantly more wear-resistant and resilient and do not splinter even at sub-zero temperatures. They withstand the high impact forces of recoil-free soft-face mallets. They are also resistant to oil and grease and are also used in SUPERCRAFT...
From €2.30 *
Clawhammer Curved with Leather Grip 450g (16 oz) Curved claw and smooth face Very robust, forged under highest quality standards from one piece of tool steel head weight 450g, diameter 25mm, length 320mm, total weight 630g The best hammer in America - Estwing made in USA
€56.50 *
Thor Copper Hammer 830g The Copper face combined with the Malleable Iron head gives a SAFE but high-impact blow. Ideal where a heavy blow is required combined with a relatively small striking area. Faces are designed to wear and can be replaced
From €21.00 *
Thor Dead Blow Nylon Hammer 550g A cavity inside the head is partially filled with steel shot which adds to the weight, prevents rebound and delivers ‘dead’ blows of maximum force.
From €39.50 *
Thor Nylon hammer 250g wood handle Faces are designed to wear and to be replaced by hand. All faces are one piece moulded. No metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent faces coming loose during use. Faces have a shoulder for extra strength and to prevent fracture from misdirected blows.
€19.50 *
Thor Nylon hammer 2250g Faces are designed to wear and to be replaced by hand. All faces are one piece moulded. No metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent faces coming loose during use. Faces have a shoulder for extra strength and to prevent fracture from misdirected blows.
€52.50 *
Thor Nylon Hammer Ø32mm Faces are designed to wear and to be replaced by hand. All faces are one piece moulded. No metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent faces coming loose during use. Faces have a shoulder for extra strength and to prevent fracture from misdirected blows.
From €23.50 *
Thor Dead Blow Nylon Hammer 900g A cavity inside the head is partially filled with steel shot which adds to the weight, prevents rebound and delivers ‘dead’ blows of maximum force.
€53.50 *